Skip to content

Slicer Configurations


SV06 printer profile is included in Cura v5.3+

Material Profiles

Improved Startup G-Code

G92 E0 ; Reset Extruder
G28 ; Home all axes
G92 E0 ; Reset Extruder
G1 Z3.0 F3000 ; Move Z Axis Up
G1 X3.0 Y200.0 F5000 ; Move to Start Line

M104 S165 ; Set Hotend Tempurature
M140 S{material_bed_temperature_layer_0} ; Set Bed Temp
M190 S{material_bed_temperature_layer_0} ; Wait for Bed Temp

G1 Z1.0 F150 ; Lower Nozzle
M104 S{material_print_temperature_layer_0} ;Set Hotend Temp
M109 S{material_print_temperature_layer_0} ;Wait for Hotend Temp
G1 Z0.28 F150 ; Ready to Purge

G4 S2 ; Dwell
G1 X3.0 Y3.0 Z0.28 F1500 E15 ; Draw First Line
G1 X3.0 Y3.3 F5000
G1 X50.0 Y3.3 Z0.28 F1500 E30 ; Draw Second Line
G92 E0 ; Reset Extruder
G1 Z 3.0 F3000 ; Move Z up to prevent Scratching

SV06 Plus Profile


Ehmc130's PrusaSlicer Profile

Source Ehmc130's post on /r/Sovol:

PRUSA SLICER PROFILE: My profile for Prusa Slicer is based on the Prusa i3 MK3S+ profile and for good reason. The SV-06 is basically a clone under a different name which is why Prusa Slicer lends itself well for the SV-06. I’ve adjusted print volume, retraction, some end Gcode, and a few other minor things so you don’t have to.

Begin by downloading PrusaSlicer here.

Run through the installer as you normally would.

When you open PrusaSlicer for the first time the Configuration Wizard should come up. From there click Prusa FFF → Under MK3 Family put a checkmark on the .4mm nozzle under Original Prusa i3 MK3S & MK3S+ → Click Finish at the bottom and close PrusaSlicer. (The reason we added the MK3S and S+ is so we can use the print settings presets in PrusaSlicer.)

Download my SV06 printer profile & filament presets here (updated as of 4/8/23) and unpack it.

This folder includes a printer folder and a filament folder → Add the config files I’ve provided to their corresponding folders (refer to the next step) and that’s it → You now have your printing settings from the MK3S profile, your print profile from my config, and the filament presets I’ve found to be reliable.

Click Help in PrusaSlicer → Show Configuration Folder

(Windows) Open Windows Explorer → Click the view tab at the top → Make sure the box Hidden Items is checked → Navigate to the following folder: C:\Users\Your User Profile\AppData\Roaming\PrusaSlicer.

(Mac) Open Finder → Navigate to the following folder: /Users/<user>/Library/Application Support/PrusaSlicer

Darren's Config Bundle

Has both SV06 and SV06 Plus and an 0.6 nozzle version of both printers as well. It has profiles for different layer heights/quality.


Chris' Profile Pack

Adds the ability to select all Sovol printers in the PrusaSlicer Configuration Wizard.

Just extract and drop it into your Prusaslicer location, f.e "C:\Program Files\Prusa3D\PrusaSlicer\resources\profiles"


MAK's SV06 and SV06 Plus Preset



SoftFever/OrcaSlicer configuration with nozzle 0.4 base Marlin profile and a 0.6 Klipper profile.



bassamanator's profile

SV06 SV06 Plus